58 Elliot Street, 2nd Floor, Brattleboro, Vermont
802.257.2019
emlopata@gmail.com
Store Hours: Call 802.257.2019
Welcome
Acoustic Guitars
Electric Guitars
Bass & Acoustic/Electric Bass Guitars
Semi-Hollow, & Arch Top Guitars
Acoustic-Electric Guitars
Classical Guitars
Digital Pianos, Keyboards,Midi Controller
Banjos
Ukuleles & mandolins
Dobros & Resonators
Tongue Drums
Saxophones
Trumpets & Trombones
Lap Steel Guitars
Flutes & Clarinets
Repairs
Guitar Amplifiers
Bass Amplifiers
Keyboard Amps
Drums, Electronic drums,Cymbals & Percussion
Hand Percussion
Harmonicas, Melodicas
Vermont Singing Drums
Synthesizers-Music Workstations
Recording Equipment , Microphones, Interfaces,Pick
Mixers & Monitors-Live & Recording
ART
Fender Squire
KUSTOM
Neumann
Silvertone
Soundcraft
Yamaha
Yorkville
Sheet Music
Effects Pedals- Distortion,delay,wahs,etc.
Pickups
Strings,Cables, Accessories
P.A. Equipment-Amps,Mixers,Speakers

Contemporary Music Store

YorkvilleYorkville PGM8 Mixer$359.00Yorkville PGM8 Mixer
Yorkville PGM8 Mixer * Four Mono Input Channels with XLR & ¼-inch TRS inputs * Channel 4 Mono Input has a Hi-Z input switch * Two Additional stereo line input channels (5/6 and 7/8) * Additional XLR mono input per stereo channel for maximum 6 Mic inputs * Input gain level control with Non-defeatable soft multi-slope compressor on every input * 3-band EQ, High Pass Filter, Monitor send , Effect Send, Clip LED, Mute Switch and Pan control per Channel * 60mm Faders Throughout * Global 48 volt Phantom Power * 7-band stereo graphic EQ on Main Outs * Stereo RCA Record Outputs with Level Control * BREAK Switch (mutes all input channels) * Stereo RCA Media Input Jacks with Rotary Level Control (returns pre equalizer, post BREAK switch). * Monitor TRS Output * Main stereo TRS phone and XLR outputs * Sixteen 24-bit digital audio effects * Effects TRS output jack * Effects defeat footswitch jack * Effects return to Main and Monitor * Stereo Return TRS jacks with fader * Headphone Level Control * Stereo Headphone Output Jack (Signal strong enough to drive 8-ohm speakers) * Dual 10-segment LED Output Meter * IEC removable line cord receptacle (No Adaptors) * Universal Power Supply from 90VAC to 264VAC at either 50Hz or 60Hz.
YorkvilleAudiopro Series AP818 - Mixer/Amp - 800w, 18 inputs$0.00
Audiopro Series AP818 - Mixer/Amp - 800w, 18 inputs
With 800 Watts (400 Watts/ch @ 4 Ohms), the eighteen channel AP818 stereo powered console mixer delivers the power and features required for demanding professional performance applications. Uniquely engineered internal SilentFan‚Ñ¢ cooling provides quieter performance. Channels 1 to 14 are mono with XLR and 1/4" phone jack inputs, while channels 15 to 18 are configured in stereo with cueing switches and RCA inputs. The AP818 is ideal for all music applications including disc jockey and/or live theater. Features Patching includes switchable mains/monitor amp assignment along with enough inputs and outputs for external audio processing. Rear-mounted Speakon‚Ñ¢ and 1/4" phone jacks are provided for flexible speaker output. Other features include: Two assignable 9-band graphic equalizers, a 255-preset digital effects processor with footswitchable in/out, phantom power, effects return fader, headphone jack, two LED VU meters, easy access top-mounted input / output jacks, rubber-surround rotary knobs and an attractive, durable finish.
YorkvilleYorkville YSM Studio Monitors$169.00Yorkville YSM Studio Monitors
YSM5- $169.00 YSM6 $199.00 YSM8 $259.00 YSM10-$369.00 Contoured MDF baffles, custom designed soft dome tweeters and high quality low frequency woofers used in Yorkville's YSM Series monitors combine to minimize front face reflections creating improving phase response, providing a wider 'sweet spot' in the listening position. Front facing port design solves the issue of bass coupling with back walls and corners in small environments which can generate false low-frequency information in your mix. Compatible with virtually any source, Yorkville YSM Series Studio Monitors have a widely variable input trim control for the balanced XLR / ¼-inch combi-jack input. Four position high and low frequency trim controls (at -2, -1, 0 and +1.5dB) allow user adjustable EQ contour to compensate for speaker placement in less than perfect listening spaces. Rock-solid 3/4-inch MDF cabinet construction with heavy internal bracing and ample internal dampening material reduces unwanted low frequency rumble ensures Yorkville YSM Series cabinets reproduce source material with near pinpoint accuracy and detail.
YorkvilleM810 - Mixer/Amp - 2x 400w, 10 inputs$0.00
M810 - Mixer/Amp - 2x 400w, 10 inputs
M810 - Mixer/Amp - 2x 400w, 10 inputs A new shape makes the M1610 and M810 the most versatile compact powered mixers on the market. The convenience, lighter weight and small ‘footprint’ of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new ‘wedge’ mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP and a new, more effective master EQ section and ten very useful and usable input channels complete the new ‘wedge’ mixer packages. The 800-watt M810 has two integrated 400-watt power amplifiers that can be assigned as stereo mains, or mono main and mono monitor. Each amplifier is attached to an innovative master EQ section designed specifically for these new mixers. The master EQ has a 9-band graphic EQ with additional high and low shelving EQ’s at either end of the frequency band. The nine graphic sliders are essentially all of the middle bands of a 15-band graphic EQ with the low and high frequency bands covered by separate shelving controls. This gives the user more control over the feedback-prone mid frequency bands; with high and low tone-shaping frequencies controlled by additional simple +/- 15 dB trim controls. The M810 has 10 input channels. The first six channels have balanced XLR microphone and TRS balanced inputs, input trim control, three-band EQ, master volume and trim set light. The mono line inputs on channels 5 and 6 are pre-EQ’d for Hi-Z instrument level input, making them an ideal place to start when looking for that perfect live acoustic guitar or direct bass sound. When the input trim level is properly set, users will have ample overall gain while taking full advantage of the new clip elimination circuit which makes it virtually impossible to distort the input of the microphone and instrument channels. In addition to the 6 mono microphone channels, the M810 has two discrete stereo input channels (channel 7 & 8, 9 & 10) each with three-band EQ and stereo TRS balanced inputs. Both stereo channels have an additional XLR balanced microphone input, making for a total of 8 potential microphone inputs, or 6 mono microphone inputs and two stereo line inputs.
YorkvilleM1610 Powered Mixer-1600w,10 inputs$0.00
M1610 Powered Mixer-1600w,10 inputs
M1610 - Mixer/Amp - 2x 800w, 10 inputs A new shape makes the M1610 and M810 the most versatile compact powered mixers on the market. The convenience, lighter weight and small ‘footprint’ of a box mixer with the tilt-back visibility and channel control access of a desk mixer makes these new ‘wedge’ mixers an ideal high power, high quality powered mixer solutions. High-powered high-efficiency class-H power amplifiers, newly designed input strips, on-board DSP and a new, more effective master EQ section and ten very useful and usable input channels complete the new ‘wedge’ mixer packages. The 1600-watt M1610 has two integrated 800-watt power amplifiers that can be assigned as stereo mains, or mono main and mono monitor. Each amplifier is attached to an innovative master EQ section designed specifically for these new mixers. The master EQ has a 9-band graphic EQ with additional high and low shelving EQ’s at either end of the frequency band. The nine graphic sliders are essentially all of the middle bands of a 15-band graphic EQ with the low and high frequency bands covered by separate shelving controls. This gives the user more control over the feedback-prone mid frequency bands; with high and low tone-shaping frequencies controlled by additional simple +/- 15 dB trim controls. The M1610 has 10 input channels. The first six channels have balanced XLR microphone and TRS balanced inputs, input trim control, three-band EQ, master volume and trim set light. The mono line inputs on channels 5 and 6 are pre-EQ’d for Hi-Z instrument level input, making them an ideal place to start when looking for that perfect live acoustic guitar or direct bass sound. When the input trim level is properly set, users will have ample overall gain while taking full advantage of the new clip elimination circuit which makes it virtually impossible to distort the input of the microphone and instrument channels. In addition to the 6 mono microphone channels, the M1610 has two discrete stereo input channels (channel 7 & 8, 9 & 10) each with three-band EQ and stereo TRS balanced inputs. Both stereo channels have an additional XLR balanced microphone input, making for a total of 8 potential microphone inputs, or 6 mono microphone inputs and two stereo line inputs.


802.257.2019
emlopata@gmail.com