58 Elliot Street, 2nd Floor, Brattleboro, Vermont
802.257.2019
emlopata@gmail.com
Store Hours: Call 802.257.2019
Welcome
Acoustic Guitars
Electric Guitars
Bass & Acoustic/Electric Bass Guitars
Semi-Hollow, & Arch Top Guitars
Acoustic-Electric Guitars
Classical Guitars
Digital Pianos & Keyboards
Banjos
Mandolins & Ukuleles
Dobros & Resonators
Saxophones
Trumpets & Trombones
Lap Steel Guitars
Flutes & Clarinets
Guitar Amplifiers
Bass Amplifiers
Keyboard Amps
Drums, Cymbals & Percussion
Hand Percussion
Harmonicas
Vermont Singing Drums
Synthesizers-Music Workstations
Recording Equipment & Microphones
AKG
APEX
ART
Audio-Technica
Boss
Crown
Focusrite
Neumann
Roland
Samson
Sennheiser
Shure
Tascam
Mixers & Monitors-Live & Recording
Sheet Music
Effects Pedals- Distortion,delay,wahs,etc.
Pickups
P.A. Equipment-Amps,Mixers,Speakers

Contemporary Music Store

ARTART Headphone Amp 6$149.00ART Headphone Amp 6
ART Headphone Amp 6 $159.00 The ART HeadAmp6PRO is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular "More-Me" function on each headphone mix. Each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel. Bass and treble controls are included on each output channel for fine-tuning the tone. Outputs include both front and rear panel stereo 1/4-inch TRS jacks for ease of installation and quick patching capability. Two MONO select buttons on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions. The main outputs for each channel of the headphone amplifier are rear mounted stereo TRS jacks and are wired in parallel with the corresponding output jacks on the front panel. Front panel, rear panel, or both front and rear panel outputs can be used simultaneously to drive headphones or be used as feeds to additional headphone amplifiers in a distributed audio network. Input options include XLR and 1/4-inch TRS balanced inputs with matching "Thru" jacks for bridging multiple HeadAmp 6 Pro units. An additional front panel stereo 1/4-inch TRS jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Eight-segment LED level indicators provide visual feedback of the signal level on all channels as well as the main signal bus.
ARTART M2 Condenser Microphone$169.00 w/Aluminum Carrying Case & Deluxe Cradle Shockmount ART M2 Condenser Microphone
CONTEMPORARY MUSIC STORE is a full line ART dealer. We carry hard to find mixers, audio adaptors, cables,direct boxes,and other audio utility accessories. ART M2 Cardioid Condenser Microphone Manufacturer: A R T Applied Research & Technology The ART M-Two is one of the most versatile compact side-address wide diaphragm condenser microphones available. A cardioid polar pattern with two position pad and two position low frequency roll-off switches make it the ideal studio condenser microphone for solo vocal or instrument recordings where subtlety and clarity is paramount. As a cardioid condenser microphone the M-Two picks up only sound directly in front of the mic while sounds from sides and back of the microphone are rejected increasing isolation and delivering controlled directionality. In live sound and remote recording applications, the ART M-Two’s cardioid pattern offers excellent feedback rejection and better isolation and will give you the best results on most vocal applications and a wide range of solo instruments including background brass and woodwinds, acoustic stringed instruments (violin, viola and cello), drums and percussion. It offers full frequency response at the front of the microphone with a very controlled and predictable proximity effect – the increased low frequency response when microphone is placed close to sound source. Vocalists can use the proximity effect to their advantage, adding fullness and more 'bottom end' to the voice. Experienced vocalists can easily incorporate it as part of their overall microphone technique. Note: The cardioid symbol on the microphone housing denotes the 'live side', or front face of the microphone that in all cases should face the performer. Controls on the microphone itself include a -6 & -12dB pad switch, allowing distortion-free reproduction of extremely loud at-source signals, and a two position -12dB/octave low frequency roll off at 100Hz & 200Hz that reduces unnecessary low end 'boominess' and low frequency interference. As a condenser microphone, the ART M-Two requires phantom power to operate. A subtle recessed LED under the gold capsule behind the microphone windscreen will illuminate when phantom power is present, and the microphone is operational. The microphone’s chassis is precision-tooled zinc/aluminum alloy with a dent resistant stainless-steel wire-mesh windscreen. The included heavy-duty shock-mount suspension virtually eliminates vibration and handling noise, while at the same time safely securing the microphone in any position needed during the recording process. Specifications: Type:Wide Diaphragm Side Address Condenser Microphone Capsule:32mm Gold Sputtered Low Mass Diaphragm Polar Pattern: Cardioid Frequency Response: 20Hz to 20,000Hz Max SPL:135dB / 147dB (0, -12dB) Low Frequency Roll-Off: 12dB / octave @ 100Hz & 200Hz Pre-attenuation Pad Switches: -6dB, -12dB S/N Ratio: 78dB Sensitivity: -35dB (+/-2dB) Impedance: <200 ohms Recommended Load Impedance: 1000 ohms Power Requirement: 48v Phantom Power Dimensions: 37mm x 175mm / 1.5 inches x 6.9 inches Weight: 16oz / 469g FEATURES * Wide Diaphragm Cardioid Studio Condenser Microphone * Dual Position -6dB & -12dB Pad Switches * Dual Position -12dB/Octave 100Hz & 200Hz Low Frequency Roll-Off Switch * Extremely Wide Dynamic Range * Extremely Warm, Smooth-Sounding Low Noise Circuit Design * Dual 32mm Low Mass Gold Sputtered Diaphragm Capsule * Aluminum Carrying Case & Deluxe Cradle Shockmount Included
ARTART M One USB Condenser Microphone$119.00 w/Leather zipped bag, Shockmount, 3m (10') USB CableART M One USB Condenser Microphone
CONTEMPORARY MUSIC STORE is a full line ART dealer. We carry hard to find mixers, audio adaptors, cables,direct boxes,and other audio utility accessories. The ART M-One/USB USB delivers studio quality performance in a convenient USB microphone design. Based on the popular ART M-One Studio Condenser, the M-One/USB uses the same low-mass diaphragm and upgraded high quality capsule as the studio version of the microphone, ensuring incredible tone and accurate sonic detail while adding the convenience of a Mac and PC compatible USB 2.0 24bit/ 48kHz output. The M-One/USB easily interfaces directly to virtually any computer based audio software program. An integrated 1/8th-inch TRS stereo headphone jack with onboard volume and playback mix control allows low latency monitoring of recording source and playback tracks at microphone, with no additional interface hardware required. The microphone's chassis is precision-tooled zinc/aluminum alloy with a dent resistant stainless-steel wire-mesh windscreen ensures the M-One/USB is even rugged enough for field recording applications. Deluxe, secure hard-tail microphone standmount, leather zippered bag and 3m (10' USB cable are included. The M-One/USB is compatible with Windows 2000, WindowsXP, Vista, Linux and Mac OS-X operating systems without any additional drivers. Features * Studio Quality 32mm Gold Sputtered Cardioid Capsule * USB 2.0 / 24Bit / 48kHz AtoD Conversion * Integrated Stereo Headphone Output with Level and Mix Controls * Compatible with Windows 2K, WindowsXP, Vista, Linux or Mac OS-X Operating Systems * Rugged Zinc/Aluminum Chassis & Stainless Steel Wire Mesh Windscreen * Hard-tail Microphone Standmount Included Specifications: Type: Side Address Cardioid Condenser USB Microphone Capsule: 32mm Wide Diaphragm Gold Sputtered Capsule Integrated Headphone Output: 1/8th-inch TRS Stereo Jack Controls: Headphone Level, Microphone/Playback Mix Level Headphone Power: 2 x 50mW Analog-to-Digital Conversion: 24-bit / 48kHz sampling rate Frequency Response: 20Hz to 20kHz Max SPL: 139dB Sensitivity: -38dB (+/-2dB) S/N Ratio: 83dB Impedance: <600 ohms Output: USB Type 2.0 (3m cable included) Dimensions: 37mm x 175mm / 1.5 inches x 6.9 inches Weight: 16oz / 469g Included Accessories: Leather zipped bag, Shockmount, 3m (10') USB Cable


802.257.2019
emlopata@gmail.com